Our Movement Sensor with Sound Monitor detects
your baby's slightest movements, even while she sleeps. While it may
seem that your baby is perfectly still when she is sleeping, she really
isn't. An alarm will sound alerting you to check your baby only if she
becomes absolutely still for 20 seconds and no movement whatsoever is
detected.
The under-the-mattress Sensor Pad detects your baby's slightest movements.
If your baby goes absolutely still for 20 seconds, the Sensor Pad sends
a signal to the Nursery Unit which sounds an alarm alerting you to check
your baby. If you are out of the baby's room, the two portable Parents'
Units (Sound Monitor) will pick up the alarm as well as other nursery
sounds. In addition, the Nursery Unit has an optional "tic" feature.
If the Sensor Pad senses movement, the Nursery Unit will continuously
tick. If it doesn't, the ticking will stop. The two Parents’ Units
give you the flexibility of always leaving one in your bedroom while
moving the second unit to the room you are in while your baby is sleeping.
Your crib must have a hard flat surface. If it does not, just place
a piece of masonite or a board under the mattress and place the Sensor
Pad on top of the masonite and under the mattress. You may order the
masonite directly from us. Be sure to place the correct side of the Sensor
Pad facing up.
The BébéSounds® Movement Sensor will give you the
peace of mind you won't get from just a sound monitor or even a video
monitor. And, this monitor is an excellent value. It is 2 monitors in
1 so you don't have to purchase a sound monitor.
The Angelcare Movement Sensor with Sound Monitor can only be used to monitor one baby at a time. If you have twins you will need to purchase 2 complete units. Please remember that the babies will have to sleep in separate cribs for these monitors to work properly. You will not be able to use Angelcare for more than 2 babies at a time because the monitor only has 2 channels.
The Movement Sensor with Sound Monitor includes an under-the-mattress
Sensor Pad, a Nursery Unit, two Parents' Units (sound monitor), and three
AC adapters. It can also operate with 12 AAA batteries (not included).
Model #AC201-2P
All BébéSounds® products may not
be available on all web sites or in all specialty stores.
Where to Buy:
| Retail Stores |
 |
| Babies R Us
The Right Start |
Internet Stores
|
